Daily Newsletter
September 23, 2014 Adenosine Triphosphate
You have most likely heard ATP referred to as the "energy currency" of the cell. In fact, your textbook uses this analogy: "Just as it is more effective, efficient, and convenient for you to trade money for a lunch than to trade your actual labor, it is useful for cells to have a single currency for transferring energy between different reactions and cell processes."
This is a lovely fiction that does not serve molecular biologists. It is a convenient expression, but it conveys a very serious misconception.
Nucleotide triphosphates (ATP, GTP, CTP, TTP and UTP) have their foundation in the nucleotide structure, with the addition of extra phosphate groups. Adenosine Triphosphate is the most prevalent nucleotide triphosphate, and is found as a cofactor in a number of enzymatic reactions. The picture below show the general structure of ATP.
NOTE: the nucleotide triphosphates use RIBOSE as the sugar. If the nucleotide triphosphate utilized deoxyribose, we add the letter "d" in front of the abbreviation; so dATP represents a deoxyribo-nuclotide. The only time the cell ultilizes dATP, dGTP, dCTP and dTTP is during the process of replication (DNA synthesis).
You have three phosphate groups, each with a negative charge, covalently bonded to each other. The phosphate groups naturally want to repel each other, but they are held together by one of the strongest bond types (covalent bonds). What does this mean? Molecular tension! But it must be noted that ATP is chemically stable. It does not spontaneously loose phosphates (if it did, you would also release heat). It takes enzymatic action to remove the phosphate (i.e., we have to break the covalent bond). When a phosphate is removed from ATP, it is generally attached to another molecular structure (enzymes, sugars, etc...). The exception to this will be in building nucleic acids.
This is a lovely fiction that does not serve molecular biologists. It is a convenient expression, but it conveys a very serious misconception.
Nucleotide triphosphates (ATP, GTP, CTP, TTP and UTP) have their foundation in the nucleotide structure, with the addition of extra phosphate groups. Adenosine Triphosphate is the most prevalent nucleotide triphosphate, and is found as a cofactor in a number of enzymatic reactions. The picture below show the general structure of ATP.
NOTE: the nucleotide triphosphates use RIBOSE as the sugar. If the nucleotide triphosphate utilized deoxyribose, we add the letter "d" in front of the abbreviation; so dATP represents a deoxyribo-nuclotide. The only time the cell ultilizes dATP, dGTP, dCTP and dTTP is during the process of replication (DNA synthesis).
You have three phosphate groups, each with a negative charge, covalently bonded to each other. The phosphate groups naturally want to repel each other, but they are held together by one of the strongest bond types (covalent bonds). What does this mean? Molecular tension! But it must be noted that ATP is chemically stable. It does not spontaneously loose phosphates (if it did, you would also release heat). It takes enzymatic action to remove the phosphate (i.e., we have to break the covalent bond). When a phosphate is removed from ATP, it is generally attached to another molecular structure (enzymes, sugars, etc...). The exception to this will be in building nucleic acids.
Chemist vs. Biologist
In yesterday's newsletter, a distinction was made between the perspective of chemists and biologists. If you look in most books that deal with biology, you will find the following euqation for ATP:
ATP + H2O → ADP + Pi ΔG˚ = −30.5 kJ/mol (−7.3 kcal/mol)
This is a look at ATP hydrolysis in isolation. Do you remember how ΔG is calculated? Look at the units. kJ (kilo-Joules) or kcal (kilocalories). We are basing this on an isolated reaction and measuring heat. When you look at the ΔG when there are metal ions present, you get a different number. You should also be familiar with ΔG, or Gibbs Free Energy, which is a measure of the amount of work that can be acheived by the energy release. A ΔG˚ = −30.5 kJ/mol is big, and implies that there is a great deal of energy released (the molecule can perform work).
Biologists though recognize that ATP is not in isolation. The intracellular fluid compartment (cytosol) contains ions, and more importantly metal ions, especially Mg2+ (causes major changes in hydrolysis ΔG). Inside of cells, the ΔG˚ of ATP hydrolysis is higher, approximately -50 kJ/mol (-12 kcal/mol). If we released this much energy every time ATP was hydrolyzed, the cell would boil! But, we use this energy for something else: binding the phosphate to another substrate (phosphorylation). When we phosphorylate a compound, we are building a covalent bond between the phosphate and the compound. This requires energy.1 About half the free energy is going to be used to make this covalent bond between the phosphate and the substrate. What happens with the rest? The second law of thermodynamics tells us that some of it is lost (this is an energy transfer after all...we broke one bond to build another), but the bond it self will hold some as well. Remember, chemical bonds are Potential Energy. When phosphate is removed, there will be another change in free energy (every reaction has a ΔG).
So what is the misconception with "energy currency"?
To answer this, we need to ask two other questions: why do we think of ATP as having High Energy Bonds and what is enery to a cell?
Why do we think of ATP in terms of High Energy Bonds? The answer is in the discussion above. The phosphoanhydride bonds (covalent bonds between the phosphate groups) have a high ΔG when they are hydrolyzed. This is why they have been called "high energy bonds". But in biology, the energy is used to immediately allow the phosphate group to bind to a new substrate (Phosphorylation). Put another way, the work that is done is in forming the covalent bond between the phosphate and the new substrate! The ATP is NOT a battery that energizes a curcuit.
ATP is always used in coupled reactions.
What is energy to a cell? Ask yourself, in building bonds in chemistry, what is the energy? If you want to change the energy state in a molecule, what do you do? Isn't it all about the electrons. Ultimately, the energy cells really use will be found with electrons, specifically through redox reactions. We will see that reducing potential is the energy the cells are harvesting and storing. This will be our discussion tomorrow.
Now we come to the big question: What does ATP do?
The concept of ATP as an "energy currency" comes from ATP turning on enzymes or assisting an enzyme during a "power steps" in a metabolic pathways. But ATP does not add energy; it just rearranges charge distribution around a molecule (electrochemistry). Remember, the phosphate group is negatively charged (-2).
When you add a phosphate group to a protein, you change the electrical signature around that portion of the protein (same will be true of other molecules as well). This includes the ability to form new hydrogen bonds, which can alter both secondary and tertiary structures. What will happen to the protein? It will change shape (conformational change). The work that ATP enables (and again this relates back to the free energy) is it's ability to cause conformational changes and induce molecular tension (instabilities).
Above is a general diagrapm showing a phosphorulation event. Notice how the phosphate group has interacted through van der Waals forces to change the tertiary structure of the protein.
The image below is a variant example of how ATP interacts with proteins. In this case, we see the the interaction of Myosin and Actin during muscle contraction. Focus your attention on the myosin molecule in blue. Notice that the "head" of the myosin changes conformation (shape) as ATP binds and is hydrolyzed. This is an important concept. When ATP binds, and hydrolysis occurs, a conformation change occurs. When ADP and Pi leave, the molecule resumes its "resting" conformation. In this case, it is the binding of the entire ATP molecule (with multiple negative charges) and subsequent hydrolysis which causes the conformational change. It still comes down to changing the electrical profile of the molecule (NOTE: there are more conformational changes occuring than are seen in this).
.
As we will see in upcoming weeks, this change of shape is critical to enzyme function. You have already encountered this once before, with the Sodium/Potassium ATPase.
The image below is a variant example of how ATP interacts with proteins. In this case, we see the the interaction of Myosin and Actin during muscle contraction. Focus your attention on the myosin molecule in blue. Notice that the "head" of the myosin changes conformation (shape) as ATP binds and is hydrolyzed. This is an important concept. When ATP binds, and hydrolysis occurs, a conformation change occurs. When ADP and Pi leave, the molecule resumes its "resting" conformation. In this case, it is the binding of the entire ATP molecule (with multiple negative charges) and subsequent hydrolysis which causes the conformational change. It still comes down to changing the electrical profile of the molecule (NOTE: there are more conformational changes occuring than are seen in this).
.
As we will see in upcoming weeks, this change of shape is critical to enzyme function. You have already encountered this once before, with the Sodium/Potassium ATPase.
Daily Challenge
This week you must complete all four forums to be eligible for the weekly summary and summative quiz.
Completion requires that you start a discussion, that your discussion is a minimum of 150 words on topics and at a collegiate level of writing, and that you reply to 3 of your fellow students.
Forum Closes: September 24, 11:55pm.
Completion requires that you start a discussion, that your discussion is a minimum of 150 words on topics and at a collegiate level of writing, and that you reply to 3 of your fellow students.
Forum Closes: September 24, 11:55pm.
Today, I want you to discuss the function of ATP. Do not describe it as an energy currency, instead describe how the addition of phosphates cause a change in the electrochemistry of a protein, and how that affects the conformation of the protein. Use Myosin in muscle cells as your example. We have not covered Myosin, but it is a very easy model for how ATP acts.
This is an easy to follow walk through of the interaction of ATP and Myosin. The site also contains further references.
Myosin ATPase activity: the 'powerstroke' cycle
This is an easy to follow walk through of the interaction of ATP and Myosin. The site also contains further references.
Myosin ATPase activity: the 'powerstroke' cycle
Reference
1. Berg JM, Tymoczko JL, Stryer L. (2002). Biochemistry. W H Freeman, New York. http://www.ncbi.nlm.nih.gov/books/NBK22399/, accessed on September 25, 2012
Excellent blog, good to see someone is posting quality information. Thanks for sharing this useful information. Keep up the good work.
ReplyDeleteBuy ATP Cofactor